|Version 9 (modified by leo, 10 years ago) (diff)|
This page is designed to give you a good understanding of the basics of LeoCAD, it will teach you how to browse the pieces list, add pieces to a model and move and rotate them around, create a model with multiple steps and change the camera position.
To do that we'll create a simple racing car, so start LeoCAD and you should see a window that looks like this:
LeoCAD has a standard user interface with toolbars and menus. The big white area on the left is the main drawing area and on the right there's a list of available pieces with a picture of the currently selected one and list of colors.
Note that user interface is different between Operating Systems so if you're not running the MS Windows version of LeoCAD your screen won't look exactly like the screenshots here but they will be still close.
Let's add our first piece to the model, open the "Plates" category from the pieces list on the right, then scroll down and select "Plate 1 x 4". We want our car to be blue so click on the blue rectangle at the bottom. Notice that the picture on the top right corner has changed to reflect the new color.
Now let's add the brick to the drawing area, click the "brick" icon on the top left of the screen and the mouse cursor will change to a small brick . Move it to the drawing area, click with the left mouse button and a new piece will be added to the model. Alternatively, you can simply press the Insert key to add a new brick.
TIP: You can use the grid to help you see better where each piece is located. You can do that by choosing "Preferences" under the "View" menu, then going to the "Drawing Aids" tab and checking the box "Base Grid". Also note that the X/Y/Z location of the currently selected brick is shown on the lower right corner.
Now select "Plate 2 x 4" from the list of pieces and add it next to the first piece. After you add a piece the mouse cursor changes to an icon that looks like four arrows , that means that if you now keep the mouse button pressed and move the cursor the objects that are currently selected will be moved. If you look at both bricks, you’ll see that the new brick has a blue outline, that means that it is selected and it will be modified when you drag the mouse.
While holding the left mouse button down move the mouse and position the new piece 2 "units" from the first piece like the next picture.
TIP: To move pieces one axis at a time you can click on the axis arrows, or use the keyboard (default keys are the arrow keys, Page Up and Page Down).
We want to make instructions in a way that people can see the order that we added pieces to the model so we need to split the building instructions in "steps".
Since now we'll be adding pieces on top of the existing pieces it's a good time to do so in another step, so click on the the right arrow icon on the top right toolbar. If you look at the status bar at the bottom of the screen, you’ll see that it now says "Step 2" on the right side.
Add a "Plate 2 x 8" just above the first pieces, we are going to use it to hold the first two bricks together so we will have to rotate it until it's in the correct position. Select the "Rotate" icon from the toolbar , the cursor will change and then drag the mouse until the brick is rotated 90 degrees.
TIP: Just like moving, you can also rotate around one axis at a time by clicking on the circles that appear around the currently selected piece, or by using the keyboard (default keyboard shortcut is hold the SHIFT key down while pressing the arrow, Page Up or Page Down keys).
Now go to step 3 of the project and let's keep building our car. We need to add a steering wheel and mudguards next but if you're not familiar with naming convention of the Pieces Library it can take a while to find out which category a piece belongs to but luckly we can quickly search for pieces.
Type "Mudguard" in the search box and press Enter. LeoCAD will search all piece names for the text you typed and display the results in the category tree under "Search Results" at the bottom of the tree.
Select "Car Mudguard 2 x 4 without Studs" and add it to the model, then do the same for the steering wheel and you’ll have something like this:
Advance the instructions another step and add a "Slope Brick 45 2 x 2" above the mudguard and another to the front of the car.
Let’s also add another "Plate 1 x 4" to the car, LeoCAD remembers that you recently added one so you can quickly go back to it by clicking on the arrow to the right of the search box and selecting it from the list of recently added pieces.
Here’s the picture of the almost complete car:
There's one very important thing missing in our car: the wheels, but before we add them we need to add the wheel holders so let's do that on step 5. It's not going to be easy to see the bottom of the car from the current camera position so we should rotate the camera around the car but we don't want to change the camera position for the previous steps.
To make changes not apply to previous steps LeoCAD uses a concept called keyframing, that means that any changes made to a key frame won't affect previous steps, and changes done to steps before the key frame won't affect steps after it.
Turn keyframing mode on by clicking on the "Key" icon on the toolbar , then select the "Rotate Camera" icon . Now drag the mouse until you can see the bottom of the car from a good angle. If the car is not centered on the screen, you can also use the "Pan" and "Zoom" tools to adjust the camera.
Once you get a good camera position turn keyframing mode off by clicking on the "Key" icon again and then add two black "Plate 2 x 2 with Wheels Holder" to the car:
Now we can finally add the wheels to the car, so go to step 6 and change the camera position to an angle close to what we had on the first steps of the instructions, then add a gray "Wheel Centre" and a black "Tyre" to the first wheel holder.
TODO: Talk about grouping here
Change to the "Front" camera by going to the "View" menu then selecting it from the "Cameras" sub menu (the default keyboard shortcut is "F") and zoom in. If you take a closer look you'll notice that the wheel isn't correctly aligned to the car.
You can try moving the wheel but it's not going to work because it's snapping the movement to a distance that is too big for what you need. Movement snap is a good way to keep standard bricks aligned but it doesn't help when you're trying to align smaller pieces, so now you should either turn it off by clicking on the "Grid Magnet" icon on the toolbar or select a smaller snap value by using the keyboard (default keys are 1, 2, ..., 9, 0). When you select a different snap value the status bar changes and displays the new value.
Now switch to selection mode and click on both the wheel and tyre while holding the control key down to select them and move the pieces so they align correctly with the car.
We still need 3 more sets of wheels but instead of adding one at a time we can save some time by copying the one we just added to the clipboard and pasting it back. It works like most other applications, use the toolbar buttons to copy and paste or the keyboard (default keys are Control + C for copy and Control + V for paste).
When you paste a copy it's placed right on top of the one you copied it from, so we need to move it to the other side of the car. Since the car is exactly four "bricks" wide, you can turn Movement Snap back on and set its value to 1 brick to easily position the new wheel on the other side of the car.
Once it's in position rotate it 180 degrees so it faces the right way, then make 2 more copies for the back wheels and the car will be complete:
We still need one last thing to finish the project, a driver! Advance another step and select "Minifig Wizard" from the "Piece" menu, you'll see a dialog where you can customize a minifig. Select the colors and accessories you want and click "OK" to add the driver.
The finished car should look something like this:
This finishes the tutorial, remember that this tutorial does not teach you how to use the advanced features of the LeoCAD, this is just an introduction to the basic features.
Don't forget to save the file in case you want to come back and play with it later or send it to a friend, you can also print the instructions or have LeoCAD create a web page with them for you. Just take a look at all the options you have on the menus, you can even create raytraced pictures and use them as your desktop wallpaper if you have POV-Ray installed!
- Basic01.png (12.8 KB) - added by leocad.gerf.org 10 years ago.
- Basic02.png (14.4 KB) - added by leocad.gerf.org 10 years ago.
- Basic03.png (15.4 KB) - added by leocad.gerf.org 10 years ago.
- Basic04.png (17.8 KB) - added by leocad.gerf.org 10 years ago.
- Basic05.png (17.5 KB) - added by leocad.gerf.org 10 years ago.
- Basic06.png (17.6 KB) - added by leocad.gerf.org 10 years ago.
- Basic07.png (19.5 KB) - added by leocad.gerf.org 10 years ago.
- Basic08.png (18.5 KB) - added by leocad.gerf.org 10 years ago.
- Basic09.png (18.5 KB) - added by leocad.gerf.org 10 years ago.
- Basic10.png (18.9 KB) - added by leocad.gerf.org 10 years ago.
- Basic11.png (19.0 KB) - added by leocad.gerf.org 10 years ago.
- arrow_icons.png (261 bytes) - added by philo@… 10 years ago.
- brick_icon.png (244 bytes) - added by philo@… 10 years ago.
- key.png (299 bytes) - added by philo@… 10 years ago.
- next_step.png (258 bytes) - added by philo@… 10 years ago.
- pan.png (291 bytes) - added by philo@… 10 years ago.
- rotate_camera.png (269 bytes) - added by philo@… 10 years ago.
- rotate_piece.png (281 bytes) - added by philo@… 10 years ago.
- snap_grid.png (264 bytes) - added by philo@… 10 years ago.
- zoom.png (289 bytes) - added by philo@… 10 years ago.
- Basic08b.png (16.9 KB) - added by leocad.gerf.org 10 years ago.
- recent_pieces.png (3.9 KB) - added by leocad.gerf.org 10 years ago.
- select.png (239 bytes) - added by Philo 10 years ago.
Download all attachments as: .zip